Hardware Tip: Cleaning Grease Stains on Concrete

By / Hardware Tips / Monday, 04 March 2019 01:56

Sponsored by:
ISLAND TRUE VALUE TACKLE & HARDWARE
801 N. Lake Park Blvd.   Carolina Beach, NC  28428 Phone: (910) 458-3049  Fax: (910) 458-0988
www.islandtacklehardware.com

Do your driveway and garage floor look like an ad for grease? If so, it’s time for one of the True Value formulas for cleaning greasy stuff. First, grab some cat litter and spread it around on the grease. Then grind it in real good, walking and twisting around on it. Sweep it up, and open a cola beverage. Spread the drink around on the floor. Wet the grease stains thoroughly. Work it in with a stiff broom, but don’t let it dry. Once the cola quits fizzing, rinse it with water, then whiten up the remaining gray stain with a solution of 1 cup of liquid chlorine bleach and 1 cup of powdered laundry detergent in 1 gallon of very hot water.
Carpet Stain Remover:
New carpeting looks warm and inviting for a week or so, then kids, company, dogs, TV dinners and things like red wine take their toll. New carpet certainly can brighten a home. It looks warm and inviting for a week or two, then kids, company, dogs, TV dinners and
things like red wine take their toll. Soon your new carpet looks like a military drop zone.
For chewing gum, put ice cubes in a plastic bag and freeze the gum in the carpet. When it’s hard, scrape it with a butter knife.
For greasy stuff like lipstick, blot up the excess, then use dry-cleaning fluid. For pet stains, blot any excess with paper towels, and then use a mixture of laundry detergent, ammonia and white vinegar.
For shoe polish and ink stains, dab with paint thinner.
For fruit juice and soft drink spills, mix 1 teaspoon of both laundry detergent and white vinegar in 1 quart of warm water, and sponge well. For burns, trim off fibers, and, if needed, glue in some extras from the edges.
Bonus Tip: Air Filters
With your furnace in constant use during the winter months, consider using high-efficiency pleated air filters that help your furnace pump cleaner air into your home.
It's the pleats that help you enjoy improved indoor air quality.
You see, the pleated design increases the surface area from that of regular filters.
This increased area enables the filter to capture more lint, dust, pollen, mold and mildew--up to 95% of them from the air. (Ordinary filters let as much as 8 times more airborne particles to sneak through them.)
And because the pleats have more area it takes three times longer for the filter to become saturated with dust and dirt.
So you only need to change them every 90 days instead of the recommended 30 days for standard filters (and how often do you really change them?). So make the change to pleats today!
And that’s the Tip of the week from Island Tackle & Hardware.

Author

Super User

Super User

 

 

 

 

Please publish modules in offcanvas position.